Arcol.hu Hot-end v3.0 Skeinforge finetunings

Introduction

For 0.35mm nozzle please see this manual.

This settings are made on a Rapman machine with stock drive mechanism and Arcol.hu Hot-end v3.0 mass produced version. The rapman machine has the last stable firmware: 4.0.2s
The nozzle orifice is 0.5mm, the plastic is black 3.0mm ABS from Prusa.

The hot-end also was tried out with Hard pla from Kaipa, Soft pla from Kaipa, Black ABS, White ABS, HDPE (I had nothing to print on).

You mainly need to change the temperature settings for different plastics.

The skeinforge is from 2010-10-14.

String free printing with Rapman machine

I added at the beginning of each generated file M227 S1000 P800 for print without strings. Maybe S1200 P600 gives better result, needs to play with.

To have it automatically placed in each generated file, you need to create a start.gcode file in ~/.skeinforge/alterations, with the following content:

M227 S1000 P800

Setting up skeinforge

To set up skeinforge right, please set the same values as shown on the following screenshots:

Skeinforge Craft menu:
flickr:5215080806

Craft:
flickr:5215080804

Bottom:
flickr:5215080800

Carve:
flickr:5215170302

Chamber:
flickr:5215196806

Clip:
flickr:5215157258

Comb:
flickr:5215157260

Cool:
flickr:5215157262

Dimension:
flickr:5215170312

Export: No modification

Fill:
flickr:5215170316

Fillet:
flickr:5215210084

Home:
flickr:5215210134

Hop:
flickr:5215210142

Inset:
flickr:5215210144

Jitter:
flickr:5215210148

Lash:
flickr:5215210154

Limit:
flickr:5215259502

Multiply:
flickr:5215259582

Oozebane:
flickr:5215259586

Preface:
flickr:5215259588

Raft:
flickr:5215259590

Speed:
flickr:5215259598

Splodge:
flickr:5215264844

Stretch:
flickr:5215264848

Temperature:
flickr:5215264852

Tower:
flickr:5215264854

Unpause:
flickr:5215264856

Widen:
flickr:5215264858

Wipe:
flickr:5215271420

Unless otherwise stated, the content of this page is licensed under Creative Commons Attribution-NonCommercial-NoDerivs 3.0 License