Arcol.hu Hot-end v3.0 mounting possibilities

Go one level up to Arcol.hu Hot-end v3.0

These are the current possibilities:

Rapman

No modification needed.

The Rapman machine itself needs no modification either. This Arcol.hu Hot-end v3.0 has 100% mechanical and electrical compatibility with Rapman printer.

Prusajr's Mendel

flickr:5385215739

No modification needed for version later then Sept 15, 2010.
Please see this git commit.

We use a 200k thermistor, for firmware adjusting for standard Reprap electronics, please read our manual.

Standard Mendel

As this hot-end has the same mounting as bfb hot-ends, there is already ready-made designs, even for twin extruders:
http://www.thingiverse.com/thing:2088
http://www.thingiverse.com/thing:3074
http://www.thingiverse.com/thing:3073
http://www.thingiverse.com/thing:3017
http://www.thingiverse.com/thing:3016

Also you can mount it with Wade's drive mechanism. Here is the modified Wade's drive:
http://www.thingiverse.com/thing:3015

There is a blogpost by Domonoky at:
http://ifeelbeta.de/index.php/production/wades-extruder-with-bfb-hot-end

We use a 200k thermistor, for firmware adjusting for standard Reprap electronics, please read our manual.

Makerbot

We developed two different mountings:
Minimal and Universal.

We use a 200k thermistor, for firmware adjusting for Makerbot electronics, please read our manual.

Earlier proof-in-concept working prototype.

flickr:5174379468

Read more about the Makerbot mounting

Shapercube

Needs volunteers.

UP! printer

Needs volunteers.

I have XY{your machine name here} machine, how can I adapt the hot-end?

There is a dummy plastic model on thingiverse as thing:4632, which should have the exact same mountings as the real one, so you can print
it and adapt to your machine.

There is also a blogpost at blog.arcol.hu website.

Please put your name here, that you are working on it.

Unless otherwise stated, the content of this page is licensed under Creative Commons Attribution-NonCommercial-NoDerivs 3.0 License